DVDO iScan HD Plus Video Scaler
The DVDO iScan HD+ is a high resolution video scaling processor and A/V switcher that sets a new standard for upconverting, cross-converting and even downconverting all your video sources. Whether it's your VCR outputting 480i, your DVD player at 480p, or your Set-top-box at 720p or 1080i, the iScan™ HD+ will scale the output to perfectly match the optimum resolution of your display - 720p, 1080i, or any user-defined resolution up to 1080p. It is HDCP compliant over DVI, and also accepts your legacy 480i/480p analog sources. The iScan HD+ functions as your complete A/V hub, providing simultaneous audio/video switching with automatic video upconversion/processing.
Key Features of the DVDO iScan HD+
- Motion and source adaptive video deinterlacing for NTSC and PAL/SECAM sources
- Precision Video Scaling™ technology by Anchor Bay Technologies
- Fully HDCP compliant over DVI
- Scaling of HD sources over DVI
- User defined output video resolution from 480p up to 1080p
- Flexible Input and Output Aspect Ratio Control
- Display Profiles - For multiple display configurations
- RightRate™ High-performance Framerate Conversion
- AutoVFR™ - Intelligent Component video inputs with Automatic Video Format Routing
- Advanced Source Transition Management for seamless transitions between sources
- AutoCUE-C™ - Automatic Chroma Upsampling Error detection & correction
- 12-bit video digital-to-analog converters (DACs)
- Full-frame Timebase Correction
- High performance, 10-bit multi-standard video decoder
- High quality super-adaptive comb filter with 2D Y/C separation
- Flexible Digital Audio switching and routing
- Precision AV LipSync™ intelligent digital Audio Delay technology
Inputs & Outputs
Inputs
- 2 Composite Video
- 2 S-Video
- 2 Component (Y/Pr/Pb)
- 1 DVI-D (HDCP)
- 2 Digital Audio (Coax)
- 2 Digital Audio (Optical)
Outputs
- 1 DVI-D (HDCP)
- 1 HD-15 (Y/Pb/Pr or RGB)
- 1 Digital Audio (Coax)
- 1 Digital Audio (Optical)
- RS232 Control Port
Specifications
| |
Nine video inputs |
- Two Composite inputs accept standard NTSC, PAL, and SECAM
signals
- Two S-Video inputs accept standard NTSC, PAL, and SECAM
signals
- Two Component Video inputs (YPbPr or RGB/S) process 480i,
480p, 576i, 576p signals; pass-through 720p and 1080i High
Definition signals
- One VGA Analog Passthrough input - VGA HD-15 connector
- One DVI input - DVI-I connector
- HD processes 480p, 576p signals; passthrough 720p, 1080i signals
- HD+ processes 480p, 576p, 720p, 1080i signals with HDCP
- One SDI (Serial Digital Interface (Optional)
|
| |
Four digital audio inputs |
- Two Digital Optical inputs
- Two Digital Coaxial input
|
| |
Accepts S/PDIF Dolby Digital, DTS,
LPCM @ 44Ksps to 96 Ksps, 16 bits to 24 bits |
| |
|
| Outputs |
| |
One DVI Output - DVI-I
connector |
| |
One Analog Video Output - VGA HD-15
connector |
| |
- RGB or YPbPr colorspace
- Separate H&V sync, composite sync, or sync-on-video
(bi-level or tri-level sync)
|
| |
Two digital audio outputs |
| |
- One Digital Optical output
- One Digital Coaxial output
|
| |
RS-232 port |
| |
- For software downloads and automation control
|
| |
| Controls |
| |
Infrared remote control with direct
access codes or manual controls on front panel |
| |
Functions accessible via either
On Screen Display (OSD) or front-panel LED display |
| |
Fully programmable controls for
each separate video input with non-volatile memories: |
- Automatic input source detection & input priority
selection
- Input aspect ratio select: 4:3 fullframe, 4:3 letterbox,
16:9 fullframe or custom input aspect ratio
- Output aspect ratio select: 4:3, 16:9 or custom output
aspect ratio
- Flexible horizontol and vertical Zooming & Panning
controls
- Picture controls with memory for each input: Brightness,
Contrast, Saturation, Hue, Y/C Delay, Sharpness
|
| |
Output Controls: Analog/Digital,
Format/Resolution, Aspect Ratio, Sync Type, Colorspace (RGB
or YPbPr),
Frame Lock, Display Profile |
| |
27 Built-in test patterns for ease
of set up |
| |
| |
Power |
- Universal AC mains input: 100 - 240 VAC @ 50 - 60 Hz
- Consumption < 30W
- Sleep mode - automatic 30 second timeout indicated by
power indicator color change
|
| |
Physical |
| |
- Dimensions 10.4" x 17"x 2.2" (26.3cm x
43.3cm x 5.5cm) with desktop feet
- Standard 19" 1U 1.75" rackmount option
|
| |
Weight |
- Shipping - 10.5 lb (4.8 kg)
- Unit (without power supply) - 6.4 lb (2.9 kg)
|
|
